4 Second Electric Automatic Barrier Gate For Shopping Mall Warehouse Hotel Factories
Automatic Barrier Gate Specifications
| Automatic Barrier Gate Model | DZTP-137-A |
| Automatic Barrier Gate Working Temperature | -40℃～+75℃ |
| Automatic Barrier Gate Voltage | 220V±10%, 110V±10%, 50/60HZ |
| Automatic Barrier Gate Rated power | 80W |
| Automatic Barrier Gate Relative humidity | ≤90% |
| Automatic Barrier Gate Remote control distance | ≥30m |
| Automatic Barrier Gate Net weight | 48kgs |
| Automatic Barrier Gate Speed | 1S,1.8S,3S, 6S |
| Automatic Barrier Gate Max boom length | 6 meters |
| Automatic Barrier Gate Motor Rotational speed | 1400rmp |
| Automatic Barrier Gate Protection Degree | IP44 |
Automatic Barrier Gate Advanced Features:
1. AC Automatic Barrier Gate motor is strong and powerful, and can easily lift up even with additional signage installed on to the barrier arm. AC motor is maintenance free, as there is no carbon in the AC motor, Built-in intelligent fan cools the motor during heavy usage. Exactitude aluminum alloy die-casting motor base reduces the noise and joint abrasion to prolong the barrier gate's working life.
2. WonsunThe clutch device can be conveniently unlocked to manually open or close the arm without removing the whole top cover or body housing, Resulting in hassle-free operation and all components inside the barrier body are safe from danger and vandalism.
3. Sturdy housing, Housing is made with a 2.0 mm cold rolled steel sheet for extra durability to support longer arms. The housing body is coated with epoxy paint for weatherproof protection
4. Fan cooling machine reduces the motor temperature by high frequency using, never get heat-protecting, unique temperature calefaction design for low temperature using, prevent freezing in cold weather.
Automatic Barrier GateAutomatic Barrier GateAutomatic Barrier GateAutomatic Barrier GateAutomatic Barrier Gate
Automatic Barrier Gate Model Selection and Differences
| Automatic Barrier Gate Boom type | Automatic Barrier Gate Boom Length(L) | Diameter of the spring(mm) | Note |
| Straight boom | 6M≥L≥5M | 5.5/4.5 | |
| | 5M≥L≥4.5M | 5.5 | Dispatching 4.5 |
| | 4.5M≥L≥3M | 4.5 | Dispatching 4.5 |
| Straight boom adhesive tape | 5M≥L≥4M | 4.5M≥L≥3M | 5.5/4.5 | Dispatching 4.5 |
| | 4M≥L≥3M | 3.5M≥L≥3M | 4.5 | Dispatching 4.5 |
| Folding boom | 6M≥L≥5M | 6.5/4.5 | |
| | 5M≥L≥4M | 5.5/4.5 | |
| | 4M≥L≥3M | 4.5 | |
| | Two fence boom | 5M≥L≥4M | 6.5/5.5 | |
| Fence boom | | 4M≥L≥3M | 5.5/4.5 | |
| | Three fence boom | 4M≥L≥3M | 6.5/5.5 | |
| | | 3M≥L≥2M | 5.5/4.5 | |
Communication with customers
1) Q: Connected power and pressed open/close button but the Automatic Barrier Gate did not action.
| A | Reason | Solution |
| 1 | Fuse blown | Check the fuse and power in the controller |
| 2 | The battery of the remote control powered off | Change a new one |
| 3 | External protection circuit break or at protecting status | Open the Automatic Barrier Gate door and click the OPEN/CLOSE button on the control box |
| 4 | Same frequency interference | Check photocell and loop detector |
2) Q: Connected power and press the open/close button, the Automatic Barrier Gate will move but even when it is in the right position, the motor still runs and does not stop.
| A | Reason | Solution |
| 1 | Limit switch | Adjust the horizontal/vertical limit switch to the correct position |
| 2 | Main controller failure | Change a new one |
3) Q: The motor running but the Automatic Barrier Gate arm is not in action?
| A | Reason | Solution |
| 1 | Automatic Barrier Gate arm at 45° position where is hard to move | Unlock the clutch and manually rotate the arm to a horizontal or vertical position then try again |
| 2 | The tension of the balancing spring is not suitable | Adjust spring exactly |
| 3 | Low working voltage | Check the voltage and power |
4) Q: When opening/closing, the Automatic Barrier Gate arm cannot reach the right position (90° vertical & 180° horizontal)?
| A. | Reason | Solution |
| 1 | Length adjustment of connecting rod not correct | Open the barrier door and unlock the clutch to check when the arm is at 90° vertical position if the master rod covers slave one; when the arm is at 180° horizontal position if the master rod and slave one are in the same straight line |
| 2 | Nuts on the limit switch loose | Tighten the nuts when the arm at 90° vertical and 180° horizontal position |
Why choose us?
1. OEM Brand, Logo, Label available
2. 1-Year Standard Warranty, excellent after-sales service
3. 24h*7d at your service to give you the best support
4. Detailed installation manual and wiring diagram to make everything easy
5. Fast finishing time for you to become more competitive in your local market :3-5 days for small orders.
Contact us for pricelist and catalog:
Sue Zhang
Email:sue@wonsunbarrier.com
Skype: SueZhang729
Whatsapp:+86 158 7925 9831
Product Tags:
|
|
4 Second Electric Barrier Gate For Shopping Mall Warehouse Hotel Factories Images
|
